Hail & storm damage — Newcastle, Lake Macquarie & the Hunter

Solar hail damage inspections & insurance reports

Hail can crack solar cells without leaving a mark on the glass. Our accredited solar electricians test your system and scan every panel with a thermal drone, then deliver an insurance-ready report within 48 hours.

  • Report within 48 hours
  • Drone thermal imaging
  • Voltage & current testing
  • $750 inc GST per report
Drone thermal image: panels that look undamaged but have hot, cracked cellsDrone photo: panels that look undamaged but have hot, cracked cells
⇆
What you seeWhat thermal sees

Drag the slider. These panels look fine in the photo. The thermal image shows the damaged cells.

What the inspection includes

A full storm damage check, not a look from the gutter

Voltage & current testing

Every string tested for open-circuit voltage and operating current, plus insulation resistance to find water entry or damaged cabling.

Drone thermography

A radiometric thermal drone scans every panel. Cracked or failing cells run hotter and show up as hotspots, with temperatures recorded for each one.

Visual inspection

Glass, frames, racking, isolators, cabling and roof penetrations checked and photographed for impact damage.

Report within 48 hours

Thermal and visual images, test results, findings and recommendations in one report your insurer or assessor can act on.

Real inspections

What you can't see, thermal can

Each pair was captured on the same flight. Bright squares are cells running well above their neighbours. On one recent job, damaged cells measured over 10°C hotter than healthy cells — clear evidence for an insurer, invisible to the eye.

Drone thermal image: home array in the Hunter with cell hotspotsDrone photo: home array in the Hunter with cell hotspots
⇆
What you seeWhat thermal sees

home array in the Hunter with cell hotspots

Drone thermal image: residential roof showing faulty cellsDrone photo: residential roof showing faulty cells
⇆
What you seeWhat thermal sees

residential roof showing faulty cells

Drone thermal image: commercial rooftop arrayDrone photo: commercial rooftop array
⇆
What you seeWhat thermal sees

commercial rooftop array

Drone thermal image: rural shed array with widespread hotspotsDrone photo: rural shed array with widespread hotspots
⇆
What you seeWhat thermal sees

rural shed array with widespread hotspots

Pricing

$750 inc GST per report

One fixed price for the on-site visit, electrical testing, drone thermal and visual inspection, and your written report. The cost of the report is usually recoverable from your insurer as part of the claim.

Book your inspection

How the claim process works

  1. 1Lodge your claim with your insurer and note solar damage.
  2. 2Book an on-site inspection with our team.
  3. 3We test the system and fly the thermal drone. No one needs to walk on a damaged roof.
  4. 4You receive the full report within 48 hours to send to your insurer or assessor.
  5. 5If panels need replacing, we can quote the repair work for your claim.

The trusted experts

Electroluminescence (EL) panel testing

We developed our own electroluminescence testing for solar panels. EL testing runs current through each panel so its cells glow, and a specialist camera records the light. Micro-cracks, broken cell fingers and dead cells show up as dark lines and patches — the clearest proof of hail damage there is.

EL testing can be added to your inspection when a claim needs panel-by-panel evidence. Ask our team for the price alongside the standard test and report.

  • Solar Accreditation Australia design & install accredited
  • Tested against AS/NZS 5033 and AS/NZS 3000
  • Electrical contractor licence 470217C
EL test image of a solar panel showing cracked cellsEL test close-up of hail impact damage on solar cellsFull solar panel electroluminescence test image

Questions

Solar hail damage FAQs

How much does a solar insurance inspection report cost?

$750 including GST per report. It covers the on-site visit, electrical testing, drone thermal imaging, visual inspection and the written report. The report cost is usually recoverable through your insurance claim.

How quickly will I get my report?

Your full report is delivered within 48 hours of the on-site inspection, ready to send to your insurer or assessor.

My panels look fine after the hailstorm. Could they still be damaged?

Yes. Hail can crack the cells under the glass without leaving a visible mark. Cracked cells run hotter, which shows up clearly in a thermal image even when the panel looks perfect from the ground.

Who carries out the inspection?

A licensed electrician with Solar Accreditation Australia design and install accreditation. Newy Solar Co holds electrical contractor licence 470217C.

Do I need to get on the roof?

No, and please don't. Hail-damaged panels and roofs can be unsafe. Our drone captures the thermal and visual images from the air.

What is electroluminescence (EL) testing?

EL testing passes current through a panel and photographs the light it gives off. Micro-cracks, broken cell fingers and dead cells show up as dark areas. It is the most detailed check of a panel's cells and can be added to your inspection.

Do you inspect systems you didn't install?

Yes. We inspect any rooftop solar system across Newcastle, Lake Macquarie, Maitland, Port Stephens and the Hunter.

Also see solar maintenance and repairs and our service areas.

Request a full on-site inspection